Maintenance Tips for the Composite Crusher

This article will explore the maintenance tips for the composite crusher. A deep understanding about the maintenance tips for the composite crusher can help the users better use the composite and improve the performance of the crusher machine.
First, since the vibration of the composite crusher is great when it is at work, you should install the machine on the concrete foundation. In order to reduce the vibration, noise and the impact on the foundation, a hard wood plate, subber band or other shock absorbing materials should be put between the crusher and the concrete foundation.
Second, the compound crusher works in the impact load. The work life of the babbitt lining on the bearing bush is about two years. You should re-cast the Babbitt lining if time is over the work life.
Third, a metal board should be laid on the discharging cell in the compound crusher. Therefore, enough tilt angle is necessary to prevent the block of smooth discharging of the materials. The tilt angle should be determined according to the liquidity of the crusher and the angle should be not less than 50°.
Forth, if the eccentric shaft and the bearing bush of the composite crusher are worn and the top gap is greater 1.5 times than the top gap of the original assembly, you should adjust or replace the pad.
Forth, when the oil groove of the compound crusher is worn 1.5mm, you should re-open the oil groove or adjust it. The gap between the upper cover of the link head and the eccentric shaft should be adjusted.
Fifth, when you overhaul the bearings of the motor of the composite crusher, you can carry out the idling test by removing the V-belt. Listen if there is noise. If there is noise, you should judge if the bearing is damaged. Then you can check the situations in the terminal box of the motor.
Sixth, there is too much dust in the compound crusher. You should often the dust in the cooling fin of the motor so that the heat dissipation of the motor is effective. In addition, you should deal with the opening.
We provide Professional technology, excellent product quality and intimate after-sales service when you purchase elevator bucket, preheater, grinding rod mill, china spiral classifier, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.